Humidity. Moisture. Water vapor. Evaporation. Condensation. Mold. Rot.
These are all words that go together in people’s minds when the topic of humidity comes up. But what is it and why is it so important?
I’m going to try to explain this as simply as possible, so for the scientists and engineers reading – please cut me a little slack. I’m going for clarity over precision. However, if you catch the inevitable factual errors, please point them out so I can correct them.
Fiberglass insulation against roof deck plus moisture = roof failure
In the first post, we looked at how adding insulation could lead to frozen pipes if the insulation was put in the wrong location. But, just like a sweater, if you put everything you want to be warm inside the insulation, you can keep your house and pipes happy and energy efficient.
This time, we’re looking at how to install insulation properly so that you don’t rot out your roof. Unfortunately, the photo above shows how not to insulate under your roof!
Many of my posts come back to air sealing and insulating the attic. Why is that?
If you’ve done any searching about home weatherization, insulation, energy efficiency or related topics, you’ve probably come across the picture shown above. And for good reason – it clearly shows all the common sources of air leaking into (infiltration) and out of (exfiltration) your home.
One subtle part of the picture is that the size of the arrows represents the relative amounts of air leakage from each location. See all those big orange arrows going up into the attic? Those tell you that large amounts of warm air from your house leak into the attic during the winter. This is why all us energy geeks keep spouting about the importance of sealing up the attic before you waste you time on things like replacement windows, sealing electrical outlets, and so on. You can spend thousands of dollars and countless weekends working on all these other areas and it probably won’t improve your home’s energy efficiency as much as just focusing on your attic.